12 DIY lighting project which have been tested and tried by photographers.

Photographing can be a costly passion or profession. If you’re just beginning the field, this could be a challenge for photographers who don’t have the funds to purchase the required equipment, such as lighting devices. But, we’re here to make your day easier with fifteen DIY photo lighting tricks.

Once you get into photography, you realize that there are several lighting projects you can try to enhance your photography such as faux backgrounds as well as DIY reflectors as well as lighting.

The price of top-of-the-line lighting equipment can cause the novice photographer to weep. While lighting equipment is an excellent investment for those who are committed to making photography your profession, there are times it’s not possible within the spending budget.

Here are 12 easy lighting projects which have been tried and evaluated by photographers. The majority of DIY lighting ideas require assembly, and perhaps the occasional trip to the hardware or hobby stores. However, anyone can make these DIY light options by doing a bit of effort.

  1. Make Your own Bounce Wall with household items

Professional photographers are aware that using a flash with high intensity or light in a photo shoot can cause photos to appear unflattering and flat. Bouncing walls can diffuse flashlight by reflecting the light onto the subject to create more even, soft lighting.

You can make a DIY play wall that costs less than a dime. There should be a lot of these things in your home.

  • One wire hanger
  • A piece of cardboard
  • Aluminum foil
  • Clothespins
  • Duct tape
  • Adhesive
  • Old tripod screw or adapter screw

To construct the DIY bounce will begins by covering your piece of cardboard using aluminum foil. After that, you’ll need to attach the light diffuser to the camera and bend the hanger wire in the middle.

Each end is covered using a heavy layer of tape. Install the screw through the tape, and then attach an extension hanger onto the camera. Then, place the reflector onto the side of the rod by using the clothespin, and adjust it to 45 degrees.

  1. Grab a Burger, Get Echaroux-Inspired Light

Philippe Echaroux, a French photographer, designed the homemade lighting system made from the Big Mac box and straw to fix the lighting issues that he was having when taking pictures of strangers using only an iPhone.

It’s priced at under five bucks. You can receive it for free if the box is from another person.

All you require is:

  • One empty hamburger box
  • Flashlight
  • Straw

For this, you need an empty burger container, similar to a Big Mac, and cut small holes in the front, on the bottom of the lid. It is also possible to tear a tiny piece of cardboard to fold it down to allow the flashlight to lie down.

Create a tiny hole through on the outside of the container to allow the straw. The straw’s other end will be pushed on the inside of the box, keeping it open.

For more illumination, the creator of this idea suggests applying oil from your fries onto the inside of the container so that there’s more sparkle when the flashlight shines onto the top.

  1. Highlight hair by using Pringles Can lighten hair

Pringles are delicious to take in, and there’s an abundance of creative DIY projects you can create using the container once you’ve got it empty. It can be used to create an illumination source for your photography.

In photography lighting. A Snootis is used to produce an illuminating beam which you can alter according to the need. Snoots are commonly employed to highlight hair to make a model stand out from the rest of the scene or to locate hotspots.

For a snoot-worthy snoot of the Pringles can all you have to purchase is:

  • Pringles can
  • Scissors
  • Scotch tape
  • Flashguns or flashlights

To make the Pringles can snoot, cut the top off of an empty Pringles can. After that, set your lamp to shine on it from the inside, and attach it with masking tape.

Light your snoot towards the desired location and start taking photos.

  1. Make a Retro Look using the use of a plastic baggie

Editing photos post-production can be expensive and time-consuming if do not have the right software for editing photos. But this clever DIY lighting hack lets you create stunning lighting effects on your photos, with minimal or any editing.

All you require to complete this task is

  • An open bag (zip-locks work well)
  • Scissors
  • Markers are the best choice if you want to create the effects of color leakage

The goal of this lighting trick is to create amazing leak effects to photographs for a vintage-inspired look. All you have to do is create an unflattened hole in the bottom of your bag. It should be large enough to not completely obscure the central part of your lenses.

Once you’re set to go shooting, you can put the bag in your lens. The bag can be moved around while you shoot to create different lighting effects. However, you must ensure that the central part of your lens remains clean so that your subject is in focus, and only the edges are blurred.

  1. You can soften your light by using a plastic milk jug

Photographers often use flash diffusers to prevent the flashlight from getting too harsh in a photo shoot. A lot of bright light could make your photo dull and muddy.

Diffusers, you can take a portion of the light that comes from the flash and reduce it to make sure that the light is not as intense and in-your-face.

To create this light source DIY All you require is:

  • One milk carton empty (plastic)
  • Scissors
  • Scotch tape

Get your empty jug, and remove the top part. Then, put the bottom of the jug on top of your flashgun. You might need to trim the base until it’s tiny enough to be able to sit over the flashgun. If you want to make tiny flashes you can utilize this handle in place of the base of the container.

After you’ve got your jug on the shelf put it in place with scotch tape. Then, you’ve got a DIY flash diffuser that will make your photos appear softer and warmer.

  1. The White Balloon Softbox

Another cheap and simple DIY flash diffuser that’s perfect for portraits is the balloon softbox. The diffuser emits in a narrow beam that can easily alter its size to suit different designs.

All you require is:

  • A white balloon
  • Small flashlight

This could be one of the simplest DIY projects on our wish list. To create your balloon-shaped softbox all you need be doing is to blow the balloon up and place the neck over the top of the flashlight.

It is recommended to test shots using balloons of different sizes to determine the best one for the situation you’re in. Try different balloons to create an effect of light that is shaded. The lighter ones are the best since the light reflects more naturally.

  1. Printer Paper Flash Diffuser

If you’re in dire need of a homemade photo flash diffuser that you can make use of with your camera but don’t have any available, you can always find a piece of paper that’s been used as scrap. You should try to find the standard blank piece of printed white paper.

To complete the project you’re working on, need:

  • One blank piece of white paper
  • Scissors
  • Tape

To make a photo-light diffuser, put your photo light diffuser over the flash and cut two cut-outs, one on either side of the light. After that place the folded paper over the flash and secure it in place.

Viola! You can make a DIY photo flash diffuser that costs pennies or at no cost from your pocket.

  1. Creative Color Light

If you’re looking to add some color to your photographs it’s a simple DIY lighting solution for photography that can be built with less than ten bucks. If you’ve got the necessary materials in your home the project will not cost any money.

You’ll need:

  • Clear empty plastic bottle
  • Flashlight
  • Colored cellophane or gels

To put together this lighting source, put the colors you prefer from cellophane or gels to the container. Gels are more effective, however, cellophane is less expensive and is often readily available from crafters.

Begin with blue and red shades, but experiment with other shades, too. Put your flashlight in the hole. While you’re taking photos you can move the bottle around in different ways to obtain different colors.

  1. Honeycomb Flash Grid

Flash grids are an excellent DIY photography lighting tool that you can place onto your flashlight to ensure that the light is focused on the subject of your photograph and not hitting your photo background, causing bright spots.

To design your honeycomb grid, you’ll need:

  • Black straws
  • Ruler
  • Masking tape
  • Sharp scissors or a sharp knife
  • Cardboard

To create this grid, you’ll need the cutter to slice each straw to an identical length. Make use of the black color of cardstock to make frames to store your straws.

Explore different lengths of straw to create different photo light effects.

  1. Build-Your-Own Bokeh

Bokeh Bokeh is blurred out of focus that appears as the background of many photographs. Many photographers prefer to design unique DIY shapes of bokeh to use in their photo shoots.

For creating your bokeh picture cutouts, you’ll need:

  • Pencil
  • Scissors
  • Scotch tape
  • Black paper
  • Box cutter

Find out the dimensions of the lens on your camera by adding a few millimeters so that you don’t have to fret about the light getting leaking out. Measure an equal circle of the same size and place your cut onto the thick black cardboard.

Mark in the middle. This is the place where you’ll create your custom-designed shape for your bokeh either with your fingers or using a stencil. Then, you’ll employ your boxcutter to cut the design.

After you’ve taken your pieces, you can tape the stencil to the lens and then begin to experiment using your homemade photography lighting. A lot of people prefer to begin by photographing the night light.

  1. Create shadows using Cardboard

If you’re interested in trying your hand with DIY lighting for photography that creates shadows, check out this inventive and easy DIY Photography lighting design.

To develop this DIY simple technique for your photographs All you’ll require is some cardboard and some scissors.

Cut out shapes from the cardboard, like gaps, slits, or even holes. When you’re ready for your pictures, place the cardboard against the lighting source and aim the camera.

You’ll be left with interesting shadows for your model. Try different shapes and designs, and shapes. You can even apply colored cellophane to the front of the card to create shadows that are colored.

  1. White Light Tent

The light tents DIY are commonly utilized by photographers for making lighting up their product photography or to capture models with white backgrounds. This method often creates the image to appear as if the item is floating.

It’s easy to create the lighting configuration with a homemade light box to take product photos at home. All you require is:

  • A box (sized appropriately to what you’re taking pictures of)
  • White fabric
  • Masking tape
  • White Bristol board
  • Lamps
  • Box cutter
  • Measuring tape

To make your light tent, begin by making a rectangle or square on the inside of your box. Create two” borders along the edge. Repeat this process on all sides.

Then, you cut the boxes you’ve drawn. Also, cut any tops of boxes, or simply take the flaps off. Don’t touch the bottom.

Then, cut your paper into 16 strips 2 inches thick. Then, glue these strips to the box. Then, you can use the second part of the Bristol board that is the same size that is inside the box but wider.

Place the Bristol board into the box in a way it curves toward the bottom without creating a crease. Cut any excess paper sticking off the top.

Cut and measure your fabric in a way that covers all holes along three sides. Another piece of fabric should be added to protect one of the boxes’ tops. Cover each side with tape, so the material remains in the correct position. Your lightbox is fully assembled and waiting to light with the lamps you have purchased.

 

Leave a Comment